Menu 0

TrackArmour Application Guide for Motorcycle Paint Protection Film

Quick Application Tips

  • Apply to clean surface
  • Stick the edge of the film on one side of the area you want to cover. Slowly lay the film down while simultaneously running your felt tipped applicator pad across the surface of the film. This will minimize bubbles and give you an nice bond to the surface you are protecting.
  • Make sure any edges of the film still “loose” are tucked in towards the bike to prevent any wind from catching an edge and possibly loosening the bond it has to the area you are wanting to protect
  • Using a small razor blade or even scissors will help cut the film from the roll and allow you use a size that is easily workable in the area you are protecting
  • Take you time! Slow and steady will give you the best results.

Application Technique

Key Locations to Protect

Quick Removal Tips

  • Slowly remove the film from one side to the other keeping the film straight and even in the direction you are pulling
  • Remove film as close to a 180 degree angle as possible. Avoid pulling the film straight up in a 90 degree angle
  • Continue this for all film sections on your bike.

Disclaimer: TrackArmour is intended help prevent paint damage but cannot guarantee 100% protection in any and all circumstances. TrackArmour itself cannot guarantee zero damage to your paint or surface due to the infinite amount of surface qualities this product can be placed on. We cannot be held liable for any damage and you are to use this product at your own risk.

Motorcade Car Rally 2026